Optimum combination of drag chains and cables Ready-to-install drag chain systems for coolant filling systems
In automotive manufacturing, drag chain systems for coolant filling systems are subject to very special requirements.
On one hand, they have to transport a variety of flexibles, while on the other hand, the drag chains have to be extremely robust and very reliable. Ready-to-install TOTALTRAX complete systems from KABELSCHLEPP Metool have proven successful in modern filling systems by SAT STERLING.
SAT STERLING developed special systems for automatic coolant filling for a renown customer from the automotive industry. The systems consist of two modules: The base unit – which does not necessarily have to be positioned at the production line – is responsible for temperature-dependent mixing of the coolant. This is then transported to the mobile unit, which follows the vehicle on the right or left of the assembly track and fills it with the corresponding fluids while moving.
The mobile units usually move along gantry systems which are mounted on the ceiling of the production line, at a height of up to six meters. Drag chains from KABELSCHLEPP Metool are their “lifelines”, supplying them with power. The drag chains also contain other cables and hoses for vacuum, compressed air, signal and, last but not least, coolant. In total, these special cable carriers can transport up to five media at the same time.
KABELSCHLEPP Metool supplies these drag chains as ready-to-install assemblies – including all cable, hoses and connectors. The complete systems are based on drag chains of MC1250 type, which are robust plastic drag chains with aluminium stays. In this application, they are used in a gliding arrangement; the cable carriers are equipped with glide shoes. The end customer from the automotive industry made precise specifications for the cables and connectors, which were accurately implemented by KABELSCHLEPP Metool. In addition, the hydraulic package was integrated into the TOTALTRAX complete system. Beside the customer-specific requirements, a special focus during the development of the system was on a high level of reliability. An availability of 99.9 percent had to be ensured for the SAT STERLING systems, which also applied to the drag chains.
For further information visit:
https://tsubaki-kabelschlepp.com/en-gb/products/ready-to-connect-cable-carrier-systems/
