Products & Services Directory

Specialising in the design and manufacture of repair composite materials and protective coatings for machinery, equipment, buildings and structures, Belzona offer the solution to an extensive range of engineering problems and
repair situations. From full turnkey systems to simple in-situ repairs, our innovative materials provide the answer to a variety of industrial issues, including erosion, corrosion, chemical attack, abrasion and wear, water and weatherproofing.

Simple, safe and effective solutions allow us to assist with demanding projects by providing benefits rarely found elsewhere, including minimised downtime, reduced health and safety risks and simple application techniques.

The Belzona specification ensures an exceptional standard of repair and protection, that is built on over six decades of experience and know-how. To discover Belzona products .

Founded in 1948, Fluke Corporation is the world leader in compact, professional electronic test tools and software for measuring and condition monitoring. Fluke customers are technicians, engineers, electricians, maintenance managers, and metrologists who install, troubleshoot, and maintain industrial, electrical, and electronic equipment and calibration processes.

Here at TYGRIS, we pride ourselves on providing essential cleaning, lubrication and protection solutions and revolutionising the industry. We’re based right on the coast, just a few minutes away from the Firth of Clyde, and we’ve been bringing top-notch industrial solutions from the UK to the rest of the world since 1971.

With fifty years of experience under our belts, we’re an established and trusted source of:

• Industrial aerosols, bulk oils and greases
• General maintenance, repair and operating (MRO) solutions
• High-performance paints, primers and protective coatings
• Industrial Wipes
• Spill control solutions
• Food-safe lubricants, greases, and more

That’s just a quick overview of some of the brilliant bits we have to offer, and we’re always pushing the boundaries to come up with innovative new solutions. We often create our products by taking industry needs and turning them into bespoke products designed by TEAM101. With half a century of experience, we use our commitment to our customers to create industry-leading products.

Founded in 1991, SONOTEC GmbH has developed into one of the world's leading product and solution specialist for innovative measurement technologies. With more than 170 employees and a modern corporate structure comprising three independent business units - Preventive Maintenance, Non-destructive Testing and Non-invasive Fluid Monitoring - the technology leader operates its global sales activities from the Halle (Saale) based German headquarter. The distributed portfolio includes customized ultrasonic transducers and sensors as well as testing devices and measurement solutions for a variety of different industries.

Designed with easy to service ‘Maintenance-In-Place’, Borger’s acclaimed rotary lobe pumps are in successful use for a multitude of industrial applications, as well as in the municipal, biogas and agricultural sectors. The long-established company also sells a top-quality range of separators and macerators.
Requiring no special tools, wear parts on Borger equipment can be very easily replaced, directly at the installation site, without dismantling any pipe or drive systems so that production lines and processes keep going.

Landia (established 1933) makes pumps and mixers that are built to last. In 1950, the company invented the world’s first Chopper Pump, designed for hard-to-handle wastewaters. Landia works to provide solutions for all types of effluent – from industrial, municipal, AD/biogas, food/fish processing, agriculture and many more.

UK based, Allspeeds is the sole manufacturer of Webtool hydraulic ROV cutters and systems, Tangye lifting jacks and hydrostatic test pumps, Millingford sucker rod pumps, Kopp variable speed drives and Blake Hydram water pumps.

The high performance products Allspeeds manufacture are used in many demanding, mission critical applications in the Oil and Gas, Subsea, Maritime, Nuclear Decommissioning, Military, Aviation and Construction industries. The world class design and engineering excellence of Allspeeds Ltd, coupled with industry leading manufacturing and knowledge is the trademark of our business.

Established in 1975, Dual Pumps Ltd is a leading supplier of pumps, fluid handling components, agricultural & industrial spraying products, pressure washers, pressure wash accessories & cleaning equipment. 
Our expertise and levels of customer service make us a preferred supplier for many leading manufacturers, distributors, hire shops and service centres across a broad range of industries in both the UK and export markets. 
We offer thousands of products and spare parts, all available to order via our customer service centre or online and mobile platforms. 
Our substantial stock holding regularly ensures over 95% of order lines are available for same day despatch from our modern 35,000 sq. ft distribution centre in rural Leicestershire.

Elecosoft’s ShireSystem Maintenance (CMMS) and Facilities Management (CAFM) software is one of the UK’s leading maintenance management solutions. It has helped thousands of organisations gain improved asset visibility and move towards planned preventative maintenance.
ShireSystem delivers rapid return on investment resulting in an immediate, positive impact on your business, saving you time and money. The modular solution means you can add on functionality as your requirements grow and the powerful system allows for rapid deployment.
The software enables safety risk assessments, audits, and inventory management controls including Control of Substances Hazardous to Health (COSHH) to be managed from a central database and the asset register helps manage your equipment availability efficiently
Our mobile app allows your teams to track and maintain assets both on and offline, eliminating paper admin and ensuring consistent, accurate, data.  
Available on-premise, cloud and mobile.

North Ridge Pumps are an independent manufacturer and distributor of pumps. We work within a variety of industries both UK and internationally, supplying pumps to accommodate almost any fluid from viscous grease, and aggressive chemicals to solvents, seawater, glues and resin.

Having been established since 1998, we have a vast array of experience, having provided pumps for most processes or encountering similar applications to which you may have requirements for. We can often provide more than one solution for your process which assists during the design stage.

Our pumps range from standard centrifugal and multistage pumps, to immersed and process overhung solid handling pumps. We also supply a wide range of positive displacement pumps enabling us to specify more than one solution for your application, but also meaning the majority of applications remain within our reach.

Enerpac is a global market leader in high pressure hydraulic tools, controlled force products, portable machining, on-site services and solutions for precise positioning of heavy loads. As a leading innovator with a 110-year legacy, Enerpac has helped move and maintain some of the largest structures on earth. When safety and precision matters, elite professionals in industries such as aerospace, infrastructure, manufacturing, mining, oil and gas and power generation rely on Enerpac for quality tools, services and solutions.

Agenda PR is a specialist business-to-business PR and Marketing consultancy within international engineering markets and associated industries, Agenda PR provides clients with technical marketing communications expertise, translating their complex products and service offerings into impactful PR programmes, customer friendly literature, content and copy across a wide range of social media platforms. Located near Manchester, NW England, and Hengelo, The Netherlands, Agenda PR and Marketing is ideally situated to serve the engineering sector in the UK, Netherlands, Germany, Norway, Portugal and other international markets.

World Trade Center
Industrieplein 2
7553 LL
Hengelo
The Netherlands

Faraday Predictive - Overview
Faraday Predictive Ltd was set up in 2017 to help asset owners and operators become more efficient, through the adoption of optimised maintenance strategies, particularly Condition Based Maintenance, enabled by Model-Based Voltage and Current (MBVI) Condition Monitoring Systems.
Although Faraday Predictive was only set up in 2017, we bring more than a decade of experience with MBVI systems, and several decades of experience helping organisations improve the performance of their Maintenance and Operations activities.
Based in Cambridge, we build on the world-leading capabilities of Cambridge University departments including Mathematics, Computer Science and Engineering, allowing us to develop leading-edge solutions from the ground up. We have also had superb support from Mathematicians and Scientists from a number of other leading universities
We combine this academic expertise with deep practical experience of the worlds of maintenance and asset management, of traditional Vibration-based Condition Monitoring technologies, and of education, training and consultancy support to deliver real improvements in many different industry sectors. We have real experiences of implementing RCM, TPM, CMMS/EAMS, and a variety of other maintenance improvement initiatives.
We have used this experience to define and develop the Faraday Predictive Condition Monitoring Systems, to make sure they are easy to use, easy to install, and that they provide easy to understand, actionable advice, that explains why the system has diagnosed a particular problem, the likely effect of that problem, and the recommended course of action. In short, they are designed by engineers like you for engineers like you.
Whether you just want a quick assessment of the condition of one or two machines, or are looking to implement a comprehensive Condition-Based Maintenance strategy, we are here to help you – through the supply of world-leading technological solutions, education and training, or consultancy advice.

BEMAS is a not for profit organisation in the field of maintenance and asset management. We help asset intensive organisations in Belgium and Europe on the road to world class maintenance and management of technical equipment and infrastructure.

YOUR PARTNER IN ULTRASOUND

Technology. Training. Tools. Resources. UE Systems is the world leader in providing ultrasound instruments & training solutions for predictive maintenance, reliability, condition monitoring and energy saving programs. We assist companies worldwide implementing ultrasound technology in their maintenance & reliability best practices, by providing the right inspection instruments, the right training, license-free software and continuous support. By guiding companies in establishing and maturing an ultrasound inspection program, we assist them in achieving:

• Significant energy savings by finding compressed air leaks and faulty stream traps & reporting the savings opportunity

• Downtime reduction by monitoring the condition of bearings, preventing lubrication issues & identifying bearing failures at a very early stage

• Improvements in safety procedures by using ultrasound for discharge detection during electrical inspections, at a safe distance

IFS Ultimo EAM software

With IFS Ultimo Enterprise Asset Management (EAM) software, you gain a better grip over your assets, realize higher uptime, control costs, and create a safe and healthy working environment. IFS Ultimo is well known for its rapid deployment, ease of use, seamless integrations, and unparalleled time to value. IFS Ultimo gives manufacturing, logistics, and healthcare organizations, a flexible solution for all your asset maintenance and health & safety needs.

About IFS

IFS develops and delivers cloud enterprise software for companies around the world who manufacture and distribute goods, build and maintain assets, and manage service-focused operations. Within our single platform, our industry specific products are innately connected to a single data model and use embedded digital innovation so that our customers can be their best when it really matters to their customers—at the Moment of Service™️. The industry expertise of our people and of our growing ecosystem, together with a commitment to deliver value at every single step, has made IFS a recognized leader and the most recommended supplier in our sector. Our team of 5,500 employees every day live our values of agility, trustworthiness and collaboration in how we support our 10,000+ customers. Learn more about how our enterprise software solutions can help your business today at ifs.com.

Water Jetting Association The Water Jetting Association (WJA) is a UK-based membership organisation for contractors, manufacturers, and equipment hire specialists operating across all industrial sectors, including petrochemicals, heavy engineering and construction. It is committed to the highest possible safety and technical standards for water jetting, including ultra-high-pressure water jetting, high pressure water jetting, pressure washing, and sewer cleaning. The WJA has two Codes of Practice: the Blue Code for high pressure and ultra-high pressure water jetting; and the Red Code for the safe use of water jetting in drains and sewers. Both codes of practice, developed with the assistance of industry-stakeholders and the UK’s Health and Safety Executive, are recognised as setting industry standards in the UK and internationally. The WJA is the UK’s largest provider of water jetting training. Its City & Guilds accredited courses are delivered by registered training providers and approved instructors in the UK and internationally.

Babcock Wanson is a major international provider of industrial process heating equipment and solutions with a pedigree dating back over 100 years. We have operating companies in eight countries in and around Europe, including two manufacturing sites, and a world-wide network of partners.

A key factor in our success stems from our ability to offer multiple, customised solutions to meet a customer’s needs. Rather than single solution based, we offer customers genuine choice, including a wide range of Thermal Fluid Heaters, Coil Steam Generators and Fire Tube Boilers; we provide the solution best suited to your needs, rather than a solution that fits our product range.

All products supplied by Babcock Wanson are fully supported, including tailored service and maintenance contracts.

In addition to a range of quality engineered products, Babcock Wanson also provides turnkey solutions. We have the engineering expertise and experience to customise our products and system designs to develop innovative solutions.

Rapid Energy designs, specifies and builds its own industrial HVAC equipment for short and long term hire. Operating nationwide, we provide a fast 24/7/365 service, capable of arriving on-site at a client's facility within hours. Rapid Energy can also provide client's with disaster recovery plans, consisting of a detailed site survey and equipment/plant requirements, ready to be dispatched if needed. The senior management team has a vast amount of HVAC hire experience in the UK.

Our fleet of packaged boilers start at the 100kW capacity, rising to the largest boiler in our fleet, the 2000kW (2MW) packaged boiler. Our boilers are designed, specified and manufactured in house. Each boiler is equipped with industry respected components that comprise of Viessman boilers, Riello burners, Grundfos pumps and Priva BMS for remote monitoring and management. Our packaged boilers are available for hire in multiple fuel types: Gas, IHO and HVO.

Rittal leads the world in providing solutions for industrial enclosures, power distribution, enclosure climate control and IT infrastructure. Deployed across a variety of industrial and IT applications, including automation, food and bev, transport, power generation, IT and telecommunications.
Rittal supplies all the automation support required to make enclosure assembly quicker, easier, more accurate and more reproducible. When combined with Eplan solutions, this makes it possible to link all enclosure assembly steps to create a highly efficient and digitally seamless automated process.

Rittal and Eplan can supply all the necessary software tools, machinery and equipment. These include perfectly coordinated software solutions, system technology, machinery and services that deliver unique competitive advantages in panel building and switchgear manufacturing. Using the Industry 4.0 concept to manufacturing with value chain solutions which combine value-enhancing process steps in engineering, design, work preparation and production.