Extra functions increase productivity while providing the same ruggedness of design. Fluke, the global leader in handheld electronic test and measurement equipment, has introduced the new Fluke 1650B Series of multifunction Installation Testers to test and verify domestic, commercial and industrial electrical installations The Fluke 1650B Series show two measurements at once on a dual display. This can show PEFC/PSC and loop impedance results in parallel negating the requirement to run the tests separately, more than halving the test time of other loop testers. The 1650B Series also features an additional new high-current loop test which gives extremely fast measurements when testing in circuits where no RCDs are being used. All the 1650B Series offer both non trip and this new high current test so the user can select depending on the application.

In addition there is fast voltage measurement between L-N, L-PE and N-PE using the mains cord, with no need to change measurement connections.

An Earth Volt Touchpad detects earth voltages raised above 50V to indicate potentially dangerous situations. The instruments are supplied as standard with fused test leads to comply with HSE Guidance note GS38. These latest leads from Fluke have gold plated contacts to ensure reliability and repeatability of testing.
The Fluke 1653B is the complete tester for virtually all electrical wiring installations, for domestic, commercial and industrial use. The 1652B is the ideal tester for the professional working in domestic and commercial installations. The Fluke 1651B is the everyday tester, ideal for domestic installations covering all the basic needs for testing the 17th Edition wiring regulations / Part P of the building regulations.

For ease of use, a rotary dial clearly indicates which function is selected, and provides access to all functions in one place to avoid complex multi-level menus, so that even after a long period of non-use the Fluke 1650B remains intuitive to use. A large display with backlight uses clear symbols and has an exceptionally wide viewing angle for easy and safe readings. There is a PASS/FAIL indication for RCD test results, and a variable RCD current mode for customised settings.

It is compact, lightweight (less than 1.2 kg) and has a padded neck-strap to free testers’ hands for testing.

The Fluke 1653B is equipped with a built-in memory to store test results fast and easily on site without any additional device needed. Each stored measurement consists of the test function and user selectable test references, such as the cabinet and circuit number. The data can be uploaded to a computer after testing for the preparation of professional reports. A slim probe with test button supplied with the 1652B and 1653B enables initiation of a test without the need to access or reference to the front panel when probing hard to reach points.  

All Fluke 1650B models have detachable standard 4-mm leads that can be replaced if damaged or lost, and require no customised special connectors. A durable hard case protects the instrument in tough field conditions. A Zero Adapter ensures easy, reliable and accurate test lead and mains cord compensation. The adapter can be used for all kinds of mains plugs and test accessories like probes and alligator clips.

The new Fluke 1650B Series can be purchased from Fluke authorised distributors and wholesalers. For more information about all Fluke products, visit www.fluke.co.uk