TPI Europe' s Condition Based Monitoring Intelligent tools to monitor, analyse & interpret vibration, bearing condition, temperature and overall machine health.

: Fluke Networks announces an upgrade to its LinkIQ™ Cable+Network Tester that expands the tester’s ability to test and troubleshoot IP networks, and support users in 12 languages. This new software is shipping in all new LinkIQ units and is available as a free upgrade to existing customers.

“While systems integrators and network administrators need to verify cabling performance to ensure network performance, they also need to ensure that the user’s traffic can reach its destination,” stated Robert Luijten, Field Marketing Director, Fluke Networks.

“Our network test features give these professionals visibility into network connectivity and response time of key resources, allowing them to verify and troubleshoot end-to-end network issues.”

The new release includes:

• Expanded network testing – With version 1.1, customers can now verify connectivity and response time to key network devices with one touch of the screen. LinkIQ can now be configured to perform IPv4 or v6 ping tests and will display the response time for four pings to a target device of the user’s choosing. The test results display the DNS and DHCP servers and the gateway router. LinkIQ also displays the IP address of the nearest switch. The new version of LinkWare PC includes this information in its test reporting.
• Two-pair cable tests – Cable performance tests up to 100 Mb/s can be specified for two-pair cables, widely used in industrial environments.
• Language support – The LinkIQ user interface now supports 12 languages.
• Reporting – A new version of the LinkWare™ PC software, the industry's de facto reporting solution, is also available. This new version provides reports including the expanded network testing, allowing users to document their work.

The 1.1 software release is available in the LinkIQ Cable+Network Tester, which can be purchased from Fluke Networks resellers worldwide or at www.flukenetworks.com/LinkIQ.

Current owners can access the new firmware and LinkWare PC by visiting: www.flukenetworks.com/support/downloads.

 TLV Euro Engineering has launched QuickStation™ QS10, a compact, reliable steam trap station for use with TLV QuickTrap® to allow for condensate drainage from steam mains, tracers and light processes, which is suitable for use in pharmaceutical, food and beverage applications or where ease of steam trap installation and maintenance is critical.

The QuickStation QS10’s compact, all-in-one design and reliable operation enables simple, inline trap installation in either the horizontal or vertical plane in minutes. It is constructed from stainless-steel for durability and corrosion resistance and is suitable for applications with maximum operating temperature of 185ºC and maximum operating pressure of 10 barg.

The four models in the QS10 range are offered with multiple piping arrangements and either single or double upstream/downstream isolation valves. The double isolation, along with optional BD2 blowdown valve, allows operators to blow out condensate/steam to prove safe isolation and allow for a safe replacement. An integrated strainer helps to prevent equipment damage or production issues due to entrained material, and an integral check valve prevents backflow.

TLV Euro Engineering also offers a range of precision-engineered QuickTrap models compatible with QuickStation for numerous applications, including its renowned Free Float® traps to minimise steam loss and save energy, and balanced pressure thermostatic and thermodynamic models for specific applications.

By making trap installation, replacement, and maintenance simple, costly steam trap problems can be rectified quickly, preventing energy loss, preventing system damage and improving energy efficiency.

For further information on the QuickStation QS10 and other steam solutions, call TLV Euro Engineering on +44 (0)1242 227223, email This email address is being protected from spambots. You need JavaScript enabled to view it. or visit www.tlv.co.uk.

A smart power controller does what it says on the tin. It is smart because it has a microprocessor and sophisticated programming. It controls power using sensors that monitor voltage and current, adapting and making decisions as conditions change within the parameters of the application that it’s being used. However, it’s a valuable tool that is often overlooked. Here, Eric Rios, product manager for controls at Watlow, explores why smart power control is vital in heating applications.

There are many types of power switches that are used in commercial and industrial applications. Mechanical relays and contactors are ideal for applications where they are not switched very often because they are relatively inexpensive and do not produce much heat. But for precise control of electric heating, these switch types are a poor choice because they wear out and fail quickly if switched frequently. In this instance, smart power controllers are a sensible choice.

Taking working comfort and layering systems to a whole new level. 

The Snickers Workwear climate control system includes functional base layers, insulating mid layers and weather-protective outer layers.

These technically advanced working clothes allow craftsmen and craftswomen to adjust to changing weather conditions on site so they’re always working effectively – with maximum comfort and protection.

Take the new FlexiWork Inverted Pile jacket for example. This warm and versatile pile jacket can be used both as a jacket in cooler conditions or a mid layer when the weather is more inclement. Made of laminated polyester fabric with a furry pile lining for optimal warmth and comfort, its ergonomics also feature shaped shoulders for a great fit and optimum freedom of movement.

Hi-tech, advanced fabric technology like this is integral to all Snickers Workwear’s Base-, Mid- and Top-Layer garments for both men and women that always combine well with the Snickers Workwear hallmarks of best-in-class durability, comfort, ergonomics and fit.

 https://www.snickersworkwear.co.uk/campaigns/461

Hammond Electronics’ new HYJ Series IP69/IP69K 304 stainless steel enclosures are designed for use in manufacturing areas where maintaining hygiene standards and avoiding contamination build-up are critical considerations. They withstand regular high temperature, high pressure washdown and there are no dirt traps where contaminants could gather. Information about Hammond’s design approach to hygienic enclosures is available here: https://www.hammfg.com/hygienic.

The family is initially available in five sizes from 202 x 124 x 102 to 416 x 338 x 203mm. The symmetric rectangular design means that the units can be vertically or horizontally surface mounted. All sides slope to ensure that water quickly drains off after spray cleaning, and a super-smooth finish stops water pooling. There are no slotted screw heads, quarter turn latches or welded mounting brackets which can be difficult to clean areas; the front cover is secured to the body with crevice-free hex head bolts fitted with an external silicone washer.

The distinctive blue coloured "hygiene" silicone gasket is fitted beyond the cover edges and it is easily removable for cleaning or replacement. To eliminate difficult to clean areas behind the enclosure, stand-offs, available in four different lengths, ensure that the HYJ is fixed well proud of the wall so that all faces can be washed down.

Simultaneously launched are the complementary HYPB pushbutton family for machine and process control. They are available with 22.5 or 30.5mm holes arranged in a single row of one, two, three or four holes, two rows with four holes arranged in two rows of two or two rows with six holes arranged in two rows of three.

Available from Fluid Motion Solutions (part of NOV Inc.) with a host of new features, the Mono EZstrip range of progressing cavity pumps now makes in-situ maintenance easier than ever for wastewater sludge applications.

The smooth-profile Positive Torque Split Coupling Rod of the EZstrip pumps already alleviates potential ragging issues to reduce maintenance and assembly times.

Designed with Maintain-in-Place, EZstrip pumps also only need a spanner and an Allen key for quick and easy disassembly, de-ragging and servicing.

With 360° access to the coupling rod and drive shaft for easy inspection, there is now the benefit of a captive support foot.

If required, the full drive-train, including rotor, stator, shaft, rod, and seal can be quickly and safely removed, without physical electrical disconnection.

Available in cast iron or stainless-steel with a choice of rotor and stator materials to suit individual applications, the EZstrip range also benefits from a tie-bar-free design. EZstator clamps lock the stator securely into place, not only reducing stator removal time by over 50%, but improving the safety of common maintenance operations.

NOV

Fluid Motion Solutions

Greengate, Middleton, Manchester, England M24 1SA

+44 (0) 161 339 9000

nov.com/industrial

This email address is being protected from spambots. You need JavaScript enabled to view it.

Using ATEX or IECEx certified lighting in atmospheres where hydrogen may be present is strongly recommended as a safety precaution by technical experts at Wolf Safety.

While acknowledging that hydrogen’s ‘green’ credentials are highly encouraging, Wolf Safety believe the risks of explosion in atmospheres where hydrogen is present should not be underestimated.

As world leaders in the design and manufacture of portable and temporary lighting for use in hazardous areas, Wolf Safety are well aware of hydrogen related risks and offer safe, certified lighting solutions for use in hydrogen atmospheres.

Says Michael Morley, the company’s Technical Director:  “Engineers and technicians working where hydrogen or other explosive gases or vapours could  be present can be confident that Wolf has a safe, ATEX certified and cost-effective portable and temporary lighting solution which can be tailored to meet their specific needs.”

The company’s range of portable lighting, temporary lighting and power distribution solutions includes products already certified for safe use in workplaces where hydrogen gas could be present.

They include Wolf’s robust yet highly portable WF-300®XL and WF-250XL LED floodlights which are used worldwide, especially by engineers inspecting, repairing and maintaining storage tanks in the oil and gas industry.

Mains and low voltage versions of floodlights and  luminaires, battery powered LED work lights, torches, handlamps, head torches and warning lights are also available from Wolf Safety.

For technical information visit:  www.wolfsafety.com

The new-to-market Clamp Meter 393 FC from Fluke is the world’s first handheld tool which enables technicians to safely measure up to 1500 V in DC environments such as industrial solar farms.

  Fluke is experiencing increasing demand for high-precision handheld devices which can measure photovoltaic (PV) systems in the United Kingdom.

The number of solar installations in the United Kingdom has doubled within the last year and is set to double again before 2030. Solar Energy UK, an established trade organisation, is working with 230 businesses across the solar and energy storage value chain to increase the UK’s solar storage capacity to 40 GW.  

This dynamic growth is creating an ever-increasing demand for technicians who know how to troubleshoot PV systems efficiently and effectively. Clamp meters are often used in the installation and commissioning phase as well as when completing maintenance and troubleshooting.

The new-to-market Fluke 393 FC Clamp Meter is the world’s only CAT III 1500 V rated true-rms clamp meter which enables technicians to take measurements in DC environments, such as industrial solar farms. The tool was tailormade to test and measure solar PV applications with key functions including:  

The new acoustic camera SONASCREEN generates acoustic images from both the audible and ultrasound frequency range. The device enables maintenance teams to quickly locate leaks in compressed air and vacuum systems. By introducing the new industrial imager, SONOTEC provides a supplementary device for predictive maintenance and energy auditing to ensure operational reliability and energy efficiency.

 Maintenance workflows put to another level – more efficient, more accurate.

 The new acoustic camera localizes sound sources and visualizes complex acoustic information in different colours (as an acoustic photo and video). The device extends the vision to areas the eye cannot see. This is enabled by the method called beamforming where the position of sources in wave fields, such as ultrasound fields, is determined.