Compressed air is a robust system that’s vital to manufacturing, but it’s also its most complex challenge. Navigating the delicate balance between system optimization and operational risk is what separates standard maintenance from true facility leadership.

In this EXAIR webinar to be held June 25th at 11:00 am, featuring Direktin, we identify the three most common technical failures that compromise system efficiency and inflate operating costs. Through live demonstrations and software modeling, we will break down the following:

1. Homemade vs Engineered Solutions: We’re running a head-to-head test between a standard drilled pipe and an EXAIR Super Air Knife. We’ll test them both with calibrated equipment and then plug those numbers into the Direktin calculator to show how easily you can calculate savings on-the-fly.

2. Loud ≠ Performance: Many operators mistakenly equate high decibel levels with high force. We demonstrate an open pipe vs. an engineered nozzle to prove that noise is a symptom of turbulence and waste, not performance.

3. Plumbing and Pressure Drop Failures: If your plumbing is wrong, your performance is gone. We’ll use EasyCAS software to model a botched installation and show how a lack of predictive setup leads to massive pressure drops and poor performance.

Stop guessing with your pneumatic setup. We’re going to show you how to audit your own processes, using the right tools, to ensure you get the maximum force-to-flow ratio out of your compressed air infrastructure. Register now for this live webinar. https://exair.co/190-swebpr