Online Vibration Monitoring To Avoid Costly Breakdowns.

Test Products International are adding to their existing range of Condition Based Maintenance instruments with an online monitoring system and vibration analyser called Smart Vibration Monitor.

The system is easily fitted to your existing rotating machinery, e.g.  pumps and motors to provide an early warning of machine failure. (Read More) 

Three key features distinguish Smart Vibration Monitor an innovate device:

Ease of installation / use
Low cost
Standalone operation or integrated to your factory management software

Smart Vibration Monitor is DIN rail mounted and available with four, or eight, channels of accelerometer input, together with temperature and tacho inputs. These have the part numbers of 9034 and 9038 respectively. Using the supplied monitoring software it is straightforward to set vibration alarms relevant to your machine for each of the accelerometer inputs.  The analyser can be used in various ways but in its simplest form is installed as a standalone system with alarms configured to either four or eight relay outputs. As standard Smart Vibration Monitor  is also equipped with a 4-20mA output  for each accelerometer input - making it simple to connect to existing monitoring systems.

If a laptop/PC is connected via USB cable up to 64 Smart Vibration Monitor modules can be monitored and vibration levels displayed on screen. The PC connection also permits more detailed vibration analysis if required with up to 51,000 line FFT, (frequency spectrum display).

By subscribing to TPI’s optional DataDecypher cloud based service all installed modules, (and measurements from other TPI vibration analysers), can be monitored, trended and analysed from a web browser interface.

www.tpieurope.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
01293 530196