Denso Protal Chosen for National Gas Grid Protection
W.G.Beaumont & Son Ltd of Romford are a chosen contractor for National Gas Grids for applying surface coating protection of weld joints and fittings in refurbishment programmes carried out in various areas of the UK.
A typical contract for National Grid carried out by W.G.Beaumont using Denso Protal 7300 is shown in the photographs. (Read More)
Once the pipe support was removed, the pipe was blasted to Sa2 1/2 and two coats of Denso Protal 7300 was applied. The support itself was blasted, painted and neoprene rubber fitted before replacing it to its original position. On the pipe risers W.G.Beaumont removed the existing coating, blasted to Sa2 1/2 and applied two coats of Protal 7300 to a minimum of 500mm above and below ground. These areas were then ready to be over-coated as per National Grid’s specification.
The company uses Denso Protal 7300 on all projects. This was recently developed by Winn & Coales (Denso) Ltd to enable it to be applied to wet, damp or dry surfaces – which is a great asset in Britain’s unpredictable climate. Denso Protal 7300 is a VOC free, 100% solids epoxy high build liquid coating that can be applied by applicator pad, brush or roller in one coat. It achieves up to 1250 microns in this single coat to give excellent gouge, abrasion and impact resistance.
Winn & Coales (Denso) Ltd
Chapel Road, London, SE27 0TR
Tel: 020 8670 7511. Fax: 020 8761 2456
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
web: www.denso.net
