Editorial

SBES SUPPLIES LONE WORKER SOLUTION TO CCLRC

Lone Worker ProtectionSBES, the lone worker protection specialist, has just completed the installation of its LifeSaver lone worker alarm system at the Synchrotron Radiation Source (SRS) building at Daresbury Laboratory in Cheshire near Warrington. The site is operated by the Council for the Central Laboratory of the Research Councils (CCLRC) and is a World class facility that supports the research community by providing access to advanced facilities and extensive scientific and technical expertise.

According to Andy Goulden, an engineer at Daresbury Laboratory, this particular application was unusual as there were two distinct types of lone workers on the site that needed protection. Firstly, there were CCLRC staff who might be working alone on a shift pattern across a 24/7 period. Secondly, there were site

SBES PROTECTS EXXONMOBIL AVIATION STAFF

ExxonMobil AviationSBES has recently completed the installation of a diverse lone worker protection system for ExxonMobil Aviation at six airports across the UK. The system, the first of its type anywhere in the World, will protect workers either out on site refuelling aircraft or back at the operational base.

The initiative to install the SBES system has come from Paul Heald, SHE and OIMS adviser for ExxonMobil Aviation in the UK. He recognised that during a 24h period at Manchester Airport personnel were often working alone and that a solution to this

SBES PROTECTS EXXONMOBIL AVIATION STAFF

ExxonMobil AviationSBES has recently completed the installation of a diverse lone worker protection system for ExxonMobil Aviation at six airports across the UK. The system, the first of its type anywhere in the World, will protect workers either out on site refuelling aircraft or back at the operational base.

The initiative to install the SBES system has come from Paul Heald, SHE and OIMS adviser for ExxonMobil Aviation in the UK. He recognised that during a 24h period at Manchester Airport personnel were often working alone and that a solution to this

Hedland Offers Products to Monitor Case Drain Lines

PCTUnexpected pump failure can be costly and time consuming. By installing an affordable Hedland direct-reading flow meter on the pump case drain, the user can monitor changes in efficiency by keeping tabs on any increase in case drain flow. The excess case drain flow shows the pump is beginning to fail. This allows you to schedule preventive maintenance and reduce unexpected down time.

Hedland's Variable Area meter has a low pressure drop, typically 1-5 PSIG with an accuracy of 2% of full scale. The meter can be installed in any position with no special piping or flow straighteners. Hedland also offers the EZ-VIEW Variable Area meter, a low cost Polysulfone version with a 5% full scale accuracy.

For a more sophisticated case drain monitoring system, Hedland offers the Flow-Alert Reed Switch and MR Flow Transmitter. The Reed Switch can automatically signal an alarm if case drain flow increases beyond a predetermined limit. It can be connected to a PLC or to other devices to automatically open closed electrical circuits, or activate warning lights and audible alarms. MR Flow Transmitters can be connected to any data acquisition, PLC or PC for advanced analysis. It features an on-board digital display and electronic output signal with analog outputs of 4-20mA, 0-5 VDC or 0-10 VDC for remote transmitter.

TOP SAFETY ACCREDITATION FOR OCS

OCSOCS is one of the latest groups of successful companies to join a leading edge scheme, designed to help industry improve its safety record.

The UK based firm recently received accreditation from SAFEcontractor, a programme which recognises very high standards of health and safety practice amongst UK contractors.

Employing 61,000 people and with a

Safety Officers' Noise Measurement Kits

CirrusAfter many requests, Cirrus Research plc have combined their most popular noise measurement instruments into a

Hydropath technology eliminates scale in Cooling Towers.

P120A food processing plant in Maracaibo, Venezuela has seen significant benefits following the installation of Hydropaths patented AquaKlear system.  Previously, the plant experienced scale and bio-fouling problems in its cooling towers as it is located in a hard water area. This resulted in the management using costly anti-scale chemicals to eliminate the effects.

The solution to this problem was the introduction of the AquaKlear P120 unit.  Two clean cooling towers were used to trial the technology, to allow a fair comparison.  During the initial stage, cooling tower 1 continued using anti-scale chemicals to remove limescale deposits and the results were recorded.  During the second stage the plant ceased using chemicals, and the AquaKlear unit was installed. Cooling tower 2 provided the

About Workmate VM

WorkmateUsing Workmate is simplicity itself. We have developed the workflow around logical steps found in typical environments in which its use is envisaged.

What's more, we offer a custom-tailoring service to YOUR specific needs around our rock-solid core program, ensuring you get a truly useful system.

Have a look at some of the main features:

PLANT FILE

The plant file holds the information that You need to hold on your Equipment, Plant, Buildings or Services.

INSTRUCTION FILE

Regular, scheduled tasks that you carry out on your Plant items. These can be Inspections, Checks, Routines, PM's or Overhauls. The task detail held in here can be printed out on work orders.

Draeger Safety Improves Full Face Protection With New

X-plore 6000The new Draeger X-plore 6000 range of Full Face Masks combines quality and reliability with comfort and ease of use.  As successors to the popular Panorama Nova Standard threaded mask, this economical range is available in five different versions and features an integral bar code and a variety of fresh new colours.  Ideal for use in any application requiring reliable respiratory protection and clear vision, the masks are fully compatible with all Rd40 standard thread filters, as well as powered air purifying respirators and normal pressure compressed air breathing apparatus.  

The new integral barcode means that not only is the mask uniquely identifiable and, therefore, more hygienic in use, but it can also be easily tracked for inventory and maintenance purposes.  Available in one universal size and featuring a triple sealing action, the X-plore 6000 range also benefits from a double-layered face seal to offer the highest possible protection for every type of face.  

This website is owned and operated by: MSL Media Limited

msl logo
www.mslmedialtd.com

Co. Number: 05359182

© 2005 MSL Media Ltd. All rights reserved. E&OE

ems logo mobile