Fixturlaser XA Pro – Redefines the Standard for Laser Based Shaft Alignment
At its launch a few years ago, the Fixturlaser XA definitely set a new standard for laser based shaft alignment products. With the introduction of new technology in both hardware and software, this alignment tool took a huge innovative technology leap forward with regards to its user friendliness and the once so time consuming task of performing shaft alignment. The Fixturlaser XA Pro is a new and improved successor to the Fixturlaser XA with more new features and more content that will make your every day maintenance job a lot easier.
As for the hardware, a completely new set of measurement units were introduced, large 30 mm CCD detector surfaces and line laser, this practically eliminates rough alignment.
The fact that all Fixturlaser shaft alignment products use two measurement units combined with their technological features, increases considerably the measurement accuracy. You can sample up to 693 measurements in each position giving in total 2079 points for calculation of a possible misalignment. Also, the CCD sensors allow for digital signal quality control, further enhancing the measurement accuracy.
To increase the mobility around your work site, the Fixturlaser XA Pro’s measurement units are equipped with Bluetooth units, i.e. wireless connection.
The display unit is one of a kind in the market as it is fitted out with the largest color touch screen available, a whole 6,4´´ in size.
The Fixturlaser XA Pro has an “All Inclusive” shaft alignment software package, which will handle most of the problems that can occur in the machine park. You will have no unpleasant surprises after the time of purchase with additional charges for e.g. unlimited storage space, machine train alignment, base and bolt bound situations, hot check, etc.
The intuitive user interface is animated thanks to the integration of 3D Macromedia® Flash™ technology in the display unit software. It guides you throughout the measurement and alignment process, using color coded icons, symbols, and measurement values, thus eliminating any possible language barriers.
The laser alignment systems from Fixturlaser consist of a wide range of technical features as standard, such as CCD technology, line laser, large detector surfaces (30 mm), and pre-mounted fixtures. These features combined with those specific for the Fixturlaser XA system, give you one of the most high performance laser shaft alignment systems on the market. And who else is more qualified to say so than existing Fixturlaser XA users!
“Siemens Wind Power A/S sees Fixturlaser AB as a serious and competent business partner, who has an understanding for the demands we have regarding equipment for laser alignment.
When we have had questions regarding Fixturlaser alignment systems, we have always experienced a quick response to our questions and they have helped us with the training for users. We have many people using the Fixturlaser XA system and therefore it is very important for us, that it is easy to use and that the risk of faulty use is low. The menus are very user friendly and easy to command. It is possible to type in your own tolerances and make programs that fit your own products.
We have been able to minimize the time spent on alignment by our fitters after the introduction of the laser alignment of our generators. At the same time the accuracy has improved, and there is not much depending on the specific experience and knowledge of the fitter. Fixturlaser XA alignment equipment has become one of our standard tools.”
“SK has been using the Fixturlaser XA well for a new plant and I think the Fixturlaser XA is the most excellent laser alignment system I’ve ever experienced.
I use the Fixturlaser XA today to align our new machine, circulation pump and gear box for cooling tower. It’s easy and fast, so we are going to introduce the Fixturlaser XA laser alignment system to other construction companies and factories.”
“We are so happy for the Fixturlaser XA system. It’s in the field all the time. The engineers are fighting over it. They don’t want to use our other systems anymore. So I think we have to buy one more set or two.”
“I’ve been doing some alignments and the Fixturlaser XA laser alignment system is working great. I can cut, copy, paste, transfer, flip, flop, roll over and on a clear day recycle. Too bad it can’t cook and paint walls. I’ll look under help. Maybe my computer “aura” is fading.”
“We have been using the Fixturlaser XA for a while now, and it has been a very positive experience for us. It is fast and accurate to use. By using the Fixturlaser XA laser alignment system, we achieve a very high efficiency which clearly meets our customers’ demands. Documentation of results is simple and functional.”
“Fixturlaser XA and OL2RXA has simplified the alignment process and improved the accuracy of the measuring results. The software for machine trains, Machine TrainXA, is a considerable improvement of the alignment process, by showing the whole machine configuration. The OL2RXA facilitates the process of finding a basic value on machinery which is exposed to thermal variations. The systems are simple to mount and use. Documentation is fast and complies with Microsoft Windows.”
For further information and our global contacts, please visit http://www.fixturlaser.com
