Metering & Monitoring

Micronics Ultrasonic Non Contact open channel flow measurement provides cost-effective solution and contribution to reducing milk wastage and costs for Dairy Processing Site.

 

Bradshaw Consulting specialises in Energy and Process loss reduction in the Food and Drink sector. Their client Dairy Crest operate a large Dairy Processing site near Stroud in Gloucestershire and with the help of the Dairy Crest Improvement team (Chemical Engineers) Bradshaw have developed and installed a unique Effluent Monitoring and Analysis system incorporating the Micronics SLT32 - Ultrasonic Non Contact open channel flow measurement system.

 

The purchase of the new turnkey system and meters was driven by a need to provide online product wastage information from the various departments and hence, further reduce milk wastage from the site.

 

Having considered various measurement alternatives Ultrasonic Non Contact meters were selected due to the ease of installation and maintenance/service benefits associated with the non-contact technology. Micronics were selected as the supplier due to a combination of their experience with open channel flow measurement technology and their competitive pricing in comparison to alternative similar technology solutions or alternatives requiring considerable civil construction work. Three Micronics SLT32 meters were purchased as a package. The meters have the capability to measure and log effluent flow and totalised flow; however, in this application they are providing flow data via a 4 to 20mA signal to the system's separate control system.

Titan Enterprises supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food & drink, laboratory and pharmaceutical. Its latest innovation, the Atrato flowmeter range, is set to challenge conventional flowmeter thinking the world over.
 

Read more...

PCB has worked closely with shaker labs around the world developing accelerometers specifically designed to withstand this demanding application.

PCB Model 352B70 has a +/-5,000g measurement range to accommodate the varying amplitudes experienced during high random vibration test profiles; a built-in two-pole low-pass filter to help reduce the possibility of saturation due to the presence of high-frequency energy that may be present; and is hermetically sealed in a titanium housing to ensure survivability in harsh environments.

The sensor is also electrically isolated to prevent unwanted electrical interference or ground loops and has a low mass design weighing in at 4.3g.

The sensor is supplied with mounting studs and an adhesive base to allow for a variety of mounting methods..
Model 682A09 installs in-line with any industrial accelerometer and converts the vibration signal to a 4-20mA velocity output that can be trended with PLC, DCS or Scada control-room systems.

Its sleek design installs right into the cable run; no DIN rails, cabinets or special power are required.

Customers can take their existing accelerometers and turn them into 24/7 vibration-monitoring devices for their most critical machinery.

The model 682A09 is a stainless-steel, hermetically sealed design capable of operating in the harshest environments with two-pin MIL connector input and three-pin MIL connector output.

It accepts a 100mV/g analogue signal, converts to 4-20mA output and operates off of loop-power supplied by the PLC, DCS or Scada system.

In addition, the 682A09 outputs the 100mV/g analogue signal via its three-pin output connector.

The analogue signal can be run to a central collection point, allowing the user to maintain the FFT capability of the original system.
A new high-accuracy and low-cost ultrasonic flowmeter is set to create a breakthrough change in small bore flow metering. ‘The Atrato’ will be launched at this year’s Mtec Exhibition at The NEC Birmingham, it uses patented technology which enables the direct through meter to handle flows from laminar to turbulent.

Read more...

These sensors are general purpose products that can be used in a very wide range of applications involving machines, processes and structures for :

    * investigations
    * diagnostics
    * application development

Read more...

Michell Instruments have released a new edition of their moisture and humidity product catalogue, which contains comprehensive information on their range of relative humidity transmitters and sensors, dew point transmitters and humidity calibration instruments.

As well as information on new products such as the MDM300 portable dew-point hygrometer and PC62 relative humidity probe, the catalogue also contains a handy guide to the measurement of humidity, which explains common equations as well as terms and conventions used in the industry.

Read more...

http://www.engineeringmaintenance.info/images/stories/Leuuze%20electronic%20PR%20pic.jpgLeuze electronic’s explosion proof sensor range is expanded by a protective housing which enables nearly 200 small optical sensors to be used in EX zones.

Leuze electronic have extended their range of explosion proof optical sensors with several new versions, plus a range of innovative new protection housings. These housings can be fitted to Leuze electronic’s very cost effective standard sensors to enable their installation in potentially explosive atmospheres.

Read more...

unipic

Forney has maintained its position as a leader in power plant and large industrial systems for more than 75 years by designing, manufacturing, installing and servicing the most innovative lines of combustion and environmental equipment.

Since it's inception, Forney's combustion products have been applied to thousands of power and industrial boilers worldwide.  Our experience includes firing oil, gas, and process by-products.  Forney's combustion products include igniters, flame detectors, duct burners, burner management systems, and speciality applications.

Read more...

Michell instrumentsMichell Instruments has re-launched its Coreci and Rense ranges of relative humidity instruments and sensors under the Michell Instruments brand. A new catalogue containing the complete range, as well as dew point transmitters and calibration instruments, is now available.

Michell acquired the Coreci RH division in 2008, adding their range of innovative RH instruments and sensors to those of the Dutch company, Rense Instruments, which Michell bought in 2006.

Read more...

Simple monitoringJBJ Techniques has spotted a gap in the market for an effective, simple to use, four-channel process monitor and alarm controller, combined with PC-based visualisation and data logging software. So the company has addressed this requirement by developing its own cost-effective package.

Why is it that, in so many different industries and market sectors, there are a myriad of all-singing-and-dancing high end products, swathes of simple, low end, single-function products, but very little in between. Take, for example, the monitoring of fluid systems in various processes. At one end of the scale, there are simple indicators to show pressure or flow – barely more than a dumb display with an alarm output or two.

Read more...

ewon ethernetBy installing an eWON industrial-grade Ethernet router – that offers secure, Internet-based remote control and diagnostics – with its lighting control systems, Architen Lighting is now able to remotely monitor and control customer lighting systems from anywhere in the world using a secure Broadband or wireless connection.

In a recent project, this technology was used by Architen to monitor and diagnose a lighting system it had installed at the new O2 Arena in Dublin, Ireland. For this project, Architen sourced a single eWON Ethernet Gateway from M.A.C Solutions (UK) Ltd, which enables Architen to remotely monitor and control the lighting system. Architen engineers simply log on to a web page on the Internet using the eWON’s Talk2M (Talk To Machines) service, enabling them to turn on or change lighting effects from their own desktop, anywhere in the world.

Read more...

the new Fluke 1650BExtra functions increase productivity while providing the same ruggedness of design. Fluke, the global leader in handheld electronic test and measurement equipment, has introduced the new Fluke 1650B Series of multifunction Installation Testers to test and verify domestic, commercial and industrial electrical installations

Read more...

The DDEN SeriesDesigned for underwater tension measurement applications, for high humidity conditions and for applications in which occasional submersion due to flooding is likely, a range of miniature, compact, low profile load cells is now available, which can be customised to suit specific applications.

The DDEN Series of load cells from Applied Measurements Ltd measure tensile or compressive forces in underwater locations to a depth of up to 10 metres, although the unit can be customised to operate in even greater depths. The unit is unique in its compactness over a wide capacity range. Even at the top end of the capacity rating of 50kN, the unit dimensions do not change

Read more...

The 33-960 Series of Micro OTDRs from IDEAL INDUSTRIESA new range of lightweight, rugged, handheld Optical Time Domain Reflectometers (OTDRs) is now available, which offers high measurement precision, fast data acquisition, ease-of-use and a variety of useful features.Increasing bandwidths in LAN and fibre optic cabling means that more in-depth testing and certification of networks is now required.

The 33-960 Series of Micro OTDRs from IDEAL INDUSTRIES are designed for the installation and troubleshooting of LAN, campus and WAN fibre networks. The combination of precise measurement, a one-button

Read more...

Thermo Scientific Model 60iThermo Fisher Scientific Inc., the world leader in serving science, today announced the new Thermo Scientific Model 60i, a full-extractive, multi-gas analyzer that features non-dispersive infrared (NDIR) optical filter technology to ensure accurate, precise measurement of up to six gases, including CO, CO2, NO, NO2, and SO2. The Model 60i also accommodates an optional O2 measurement capability using either an affordable electrochemical cell or, when high accuracy and reliability are required, paramagnetic technology. In addition, the unit is designed with built-in safeguards that protect the analyzer in the event of a sample conditioning system malfunction.

The high sensitivity of the Model 60i requires as little as one quarter the flow rate of other instruments, exposing the analyzer and sample conditioning system to less particulate and water for more dependable operation. The Model 60i also possesses a wider dynamic range than other multi-gas analyzers, requiring less configuration. 

Read more...

The new belt tension testerThe new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

Read more...

handheld circuit tracerUsing a handheld circuit tracer, a Kent-based electrical services company has solved a five-year old hidden wiring problem in a residential apartment, at the same time as helping the customer save at least

Read more...

The Efector Metris When sensor market leader ifm electronic launched the efector metris a year or so back it caused quite a storm as the first affordable device to monitor consumption or leakage of that major commodity, compressed air.

Many of you use other gases, though, and we were often asked

Read more...

Dew point HygrometerMichell Instruments are delighted to announce that they now offer a rental scheme for a number of their products. Due to a significant demand in the market, Michell made four of their most popular dew point hygrometers available for hire.

Offering the customer free packing and carriage in the UK and free technical, and applications support, the rental scheme gives the customer all of the benefits of buying a new product, but the ease of hiring it at a fraction of the cost. Each product is calibrated to National Standards and calibration is re-verified before delivery.

Providing the customer with a flexible, efficient and cost-effective solution, this scheme has been an instant success. Since its launch, Michell have had all of their available instruments out on hire and are adding to their product range to deal with the demand. Special gas producers, Air Products, Plc, Manchester, were one of the first customers to be delighted with this new service.

Read more...

The Breeze 20IMA have recently introduced a new range of digital panel meters.  The Breeze Series 20 digital panel meters are simple to programme, and with a prices starting at under

Read more...

MetercomMetercom II software
Metercom II monitoring software launched by Spirax Sarco aims to help companies save energy by applying more effective Monitoring & Targeting (M&T) programmes. With industrial gas users typically facing fuel price hikes of over 130% between 2004 and 2006, effective M&T can cut energy bills by at least 10% through simple good housekeeping.

Metercom II is a PC-based software package that provides automatic meter reading and reporting facilities for all steam meters. It can also monitor other utility meters such as gas, oil, water, air and electricity. In fact, any meter that has a pulsed or 4-20mA output can be read.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Macro Sensors has designed a series of high-temperature LVDT linear position sensors for use in various military and defence applications, such as fuel/oil level monitoring.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
A European food processing manufacturer has chosen Michell's PF211 relative humidity (RH) transmitter to control humidity and temperature in its range of fermentation chambers.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Thermo Fisher Scientific has announced the Thermo Scientific Apex 500 RX metal detector and Thermo Scientific Versa RX checkweigher for the pharmaceutical industry.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Cordex Instruments has announced that its current Centurion XP series of digital cameras for hazardous environments is now being used in the US.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The Liquiline M CM442 multi-parameter analytical transmitter with Memosens digital sensors from Endress and Hauser is said to reduce inventory and stock handling and minimise costs.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The ability to measure linear displacement over an extended range means that the AML-SGD products can now access applications in R and D, machine build, automotive, marine and geotechnics.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The Bulk Bag and Manual Dump Batching System weighs bulk materials discharged from bulk bags, or manually dumped from sacks and other containers, then empties the batch into mobile storage bins.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The Mastersizer 2000 laser-diffraction particle-size analyser from Malvern Instruments can be used to characterise the materials used to make electrodes.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Variohm Eurosensor has launched an updated website that aims to make finding the most suitable sensors and transducers easier and faster.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Honeywell has introduced the Precision Fotosurf surface topography sensor, the latest addition to the company's scanning camera measurement range for paper making.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Wilk explains how to ensure accurate biofuels-blend measurements in under a minute with portable infrared analysers.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Mettler Toledo has announced a series of on-demand webinars dedicated to educating viewers about the benefits of its Intelligent Sensor Management (ISM) platform.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The model SBC controller from Sentry Equipment can control every automatic sampler in the Sentry product line and is designed for general-purpose environments.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Wilk explains how to ensure accurate biofuel-blend measurements in less than a minute with portable infrared analysers.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Parker Hannifin has launched a compact electro-hydraulic actuator that provides a freestanding actuation system suitable for military, aerospace, marine, construction and general industrial use.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Inmoco's Magellan range of Motion Control Processors from Performance Motion Devices (PMD) provide chip-based motion control in scientific, automation, industrial and robotic applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Flir Systems has announced a reduced price for its i5 compact infrared camera, which can be used for a range of predictive maintenance and building applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Beckair is offering the AK3200 Ionising Air Knife, which helps to remove static in applications within the food and beverage industry involving handling raw materials through to the final packaging.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Adept Scientific has announced the availability of the latest Thermo Scientific software that is aimed at scientists involved in a variety of spectroscopic experiments and disciplines.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The CPH6600 handheld multifunction calibrator from Wika is designed for use in calibration services, service and maintenance companies, instrument and control workshops and quality assurance.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Raytek has introduced the MI3 Series of infrared temperature measurement sensors for original equipment manufacturer (OEM) applications and manufacturing processes.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Micro-Epsilon has added new features, accessories and mounting options to its inline infrared thermal-imaging camera, making it suitable for monitoring the temperature of steel, ceramics and glass.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Ocean Optics has developed a light-shaping technique for its spectrometers that balances and smoothes the uneven spectral emission from UV-Vis light sources used for spectroscopy applications.

Read more...

Manufacturing & Logistics IT Magazine >> 
Building on the success of previous years the mobile data specialist Codegate is once again supplying the All England Lawn Tennis Club (AELTC) with a mobile access control system for its annual Championships at Wimbledon.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
American Sensor Technologies (AST) has released the AST4000 pressure sensor, which features special configurations for hydraulic pressure measurement applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Metso has launched the Hart version of its Neles Valvguard VG9000 safety valve controller, suitable for both emergency shutdown and emergency venting valves.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The new Triton DO8 dissolved oxygen analyser system from Electro-Chemical Devices (ECD) has been developed for tough municipal and industrial water treatment environments.

Read more...

The new PF330/220 portable range of clamp-on flow meters from Micronics.

Read more...

The instruments are also suitable for wind tunnel testing and other critical sound and noise measurement applications.

Endevco pre-polarised condenser measurement microphones, available in 1/8in, 1/4in and 1/2in diameters, are offered in free-field, pressure, low-cost-array and random-incidence types and can be used to meet IEC and ANSI standards.

Array microphones offer a lower overall per-channel measurement cost and are directly compatible with Isotron (IEPE-type) signal conditioning.

They can be used as drop-in replacements within existing accelerometer test system setups for as-needed precision noise measurements.

Models may be purchased as standalone units or in a microphone and low-noise preamplifier combination with Iteds onboard memory storage capabilities, facilitating their use within larger channel count applications.

All microphones are constructed with a stainless-steel protective grid case and housing, as well as a special stainless-steel-alloy diaphragm.

Available for use with Endevco precision measurement microphones is a full range of low-noise Isotron preamplifiers, handheld calibrators and accessories.

All acoustic sensors and instrumentation are covered by a five-year product warranty.
Titan Enterprises is launching a brand new ultrasonic flowmeter, set to create a breakthrough change in small bore flow metering the world over!
The Atrato, launching at this year’s Mtec Event at Birmingham’s NEC on 27th and 28th April has already generated a huge amount of interest.

Read more...

Want to improve industrial processes, energy efficiency and end-product quality with accurate, stable and reliable measurements combined with excellent services?

At MTEC 2010 Vaisala will be launching their new HMP110 & HMP60 Humidity, Temperature OEM Modules,  in addition to showcasing their range of industrial transmitters which monitor relative humidity, dewpoint, moisture in oil, carbon dioxide, oxygen and barometric pressure in extreme conditions.

Read more...

Cambridge Sensotec’s latest addition to the successful Rapidox range of analysers is the Rapidox 3100D H2O and Oxygen Dual Gas Analyser.  This instrument adds a high-accuracy dewpoint sensor to a fast oxygen sensor to produce a bench-top unit with impressive performance.

Dewpoint is measured down to -100°C (-85°F) and it can be displayed in terms of °C, °F dp or ppmV.  Oxygen is detected using Cambridge Sensotec’s fast-responding zirconia sensor which comfortably measures oxygen levels from 100% purity right down to 10 e-20ppm.  This sensor has an impressive response time of below five seconds for a 90% response to an oxygen step change.

Read more...

A new range of submersible hydrostatic level transmitters has been launched, which can be used in depths of up to 200 metres. The transmitter offers an SDI-12 digital output and an inbuilt high accuracy temperature sensor.

The SDI-12L range of submersible level transmitters from Impress Sensors & Systems Ltd uses either a stainless steel silicon-based pressure sensor or a ceramic pressure sensor in marine-bronze. Both versions use piezoresistive technology, which provides long term stability and repeatability of measurements.

Read more...

The ECOM-A+ is a highly advanced emission analyzer for direct measurement of combustion gas parameters in industrial stack gas monitoring and combustion analysis. The measurement ranges of the instrument also allow it to be used in such related applications as natural gas and diesel engine exhaust emissions, burner/boiler combustion performance, or for determining compliance levels of O2, CO, NO, NO2, SO2.

The A+ analyzer measures eight parameters and calculates five more, including combustion efficiency and percent CO2. Data can also be downloaded to a PC.

Read more...

http://www.castlegroup.co.uk/components/com_virtuemart/shop_image/product/c12c092240bb2f0782306f7273253693.jpgThe Real Time 1/3 Octave Vocis System has the power to cover all precision noise measurement requirements. The Castle Group Pro-DX Vocis GA131M is the multi-function variant of the GA131 range, including all parameters for industrial and environmental monitoring with single and third octave settings and dual channel measurements.

The Vocis GA131M has been designed to be both functional and easy to operate. This dual measurement real time meter can handle all the sound parameters you should require and with the dBdataPro Noise Analysis Software downloaded the data to a PC for further analysis this kit is ideal for anyone serious about noise measurement.

Read more...

Kittiwake easyshipKittiwake are continually looking for ways to cut the cost of testing for our customers. One way of doing this is to decrease the hazardous nature of our tests for use and for transportation. Over the past two years we have reclassified over 80 reagents and a recent breakthrough by our Scientists now enables us to provide many of the Kittiwake DIGI Test Kits in non-hazardous for shipping versions.

The new EasySHIP reagent sachet has been developed solely with shipping costs in mind. For the first time you can now buy the DIGI Kittiwake Water in Oil test which is non-hazardous for transport and for use. On average this will save over 70% on shipping costs, dramatically reducing the overall cost per test*.

Read more...

LeuzeThe optics specialist Leuze electronic will become a sensor allrounder in 2009 and has completed its product range with inductive switches. Leuze electronic thereby presents itself in automation technology as a full-service provider, well known for its customer orientation and willingness to provide service.

With this extensive product line, the “sensor people” accommodate the requests increasingly received from customers who wish to be able to find solutions to a wide range of sensor tasks from a single partner. As our customer, you profit from the portfolio of products perfectly matched to one another, the highest level of advising competence and simplified ordering processes.

Read more...

The ATP Compact 4-in-1 Multi-Function Environment MeterThe ATP Compact 4-in-1 Multi-Function Environment Meter is proving a popular addition to ATP Instrumentation

Read more...

The OG-Cube photoelectricThe OG-Cube photoelectric sensor from sensor market leader ifm electronic Ltd provides high optical performance in a compact metal housing. The sensor offers reliable position detection in industrial applications such as conveying, packaging, material handling and automotive manufacturing.

The OG-Cube

Read more...

MFT1553Combining rugged construction with accuracy and versatility, Megger

Read more...

Digi Insolubles MeterKittiwake Developments are pleased to announce the launch of the DIGI Insolubles meter.  A unit designed to put on-site, instant and actionable oil condition results in the hands of the engineer.Insolubles are solid Contamination particles often left in oil a result of the build up of combustion related debris and oxidation products.

Insolubles constituents include carbon from incomplete combustion of fuel and, to a lesser extent, lubricants, organic polymers from oxidisation of the lube oil and fuel. They also contain sulphates from combustion of fuel sulphur and reaction with TBN additives and wear metals.

Read more...

Fluke 744 Until 15th December 2008, Fluke is offering a free Pressure Module to purchasers of a Fluke HART

Read more...

Fluke 87V/i410 Combo Kit Fluke is offering a money saving Fluke 87V/i410 Combo Kit which combines a Fluke 87V Digital Multimeter (DMM) with a Fluke i410 Current Clamp in a soft carry case. Saving 29% over buying the items separately, the kit offers a CAT IV 600V safety-rated, true-rms DMM with unmatched high performance, accuracy and diagnostic functions especially for adjustable-speed motor drives and other electrically noisy equipment, together with a CAT III 600V clamp meter for readings up to 400A AC or DC.

The Fluke 87V DMM has the measurement functions, troubleshooting features, resolution and accuracy to solve many problems associated with motor drives, and plant automation, power distribution and electro-mechanical equipment. It is engineered to withstand voltage spikes of 8kV and to help protect users against the hazards of arc flash. It includes a plug-in Fluke 80BK temperature probe, which can be used to easily check whether overheating is involved in a system breakdown. The Fluke i410 Current Clamp can be used with the 87V to measure AC/DC current in conductors up to 30mm in diameter. 

Read more...

PyrocoupleCalex is delighted to announce another first in the field of infra-red thermometry, the new PyroCouple series non-contact temperature sensors.The PyroCouple series is a range of high quality, low cost, compact sensors which measure the temperature of inaccessible or moving objects and materials.

They can measure temperatures from -20

Read more...

SecuriTESTTM ProA new, versatile, easy-to-use CCTV tester is now available, which is both lighter and more compact than its predecessor and offers unique additional features, including video level and sync testing, as well as audio level testing.

The SecuriTESTTM Pro from IDEAL INDUSTRIES is the latest product in the company

Read more...

Checkbox RedTest instrument manufacturer Seaward Electronic Ltd. has introduced a new checkbox to verify the in-service performance of portable appliance testers.In keeping with the advice included in the latest IEE Code of Practice for In-Service Inspection and Testing of Electrical Equipment, the new Seaward PAT Checkbox is designed to check the accuracy of PAT testers and confirm that test readings remain valid during the period between formal re-calibration.

Lightweight and portable and easy to operate, the PAT Checkbox can be used to check all portable appliance testers in the Seaward range, as well as those from other manufacturers.When connected to the PAT tester being assessed, the Checkbox will automatically simulate earth bond, insulation, flash and earth leakage tests. A simple comparison of the value displayed on the PAT against the specified limits detailed on the rear of the Checkbox provides an immediate indication of the accuracy of the instrument.

Read more...

Antech PremisesAntech is proud of its calibration abilities with the award and continuing additions to its UKAS Accreditation.

UKAS (United Kingdom Accreditation Service) is internationally recognised as the independent organisation for accrediting the integrity and competence of personnel, quality systems and measurement parameters.

After acquiring new premises to house our liquid flow rigs, we can now offer the following calibration in the liquid flow field.

2500 L/min UKAS Accredited Hydrocarbon Rig

Read more...

Switched SystemShell U.K. Limited has been operating an onshore telemetry wide area network in NE Scotland since the mid-1980s. The network, extending southwards from Shell

Read more...

ImageAt Elcomponent we don't just sell energy data loggers, we design them manufacture them and use them ourselves, and we've been doing so for over twenty years! Our products are designed for the real world where ease-of-use, reliability and accuracy are the watchwords. The SPCMini and its dedicated PC software package 'PowerPackPro' combine new technology and years of experience into an unbeatable low-cost package.

The SPCMini has all the features you'd expect in a 21st century design. It has a large clear display, a massive 'Flash' memory - enough for 1 minute logging for over a month - and of course, it's completely secure. Set-up and data download is via an integrated Bluetooth

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Gas Data has developed a self-maintenance Click system to give users greater flexibility over traditional fixed-unit gas monitoring systems.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Metrix has introduced the Pro440 single-channel vibration switch, which has been approved for use in hazardous areas and is suitable for cooling-tower, fan and pumping applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Magnet Schultz has launched an Atex-rated shotbolt range for industrial oil and gas platforms and installations.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Avery Weightronix has introduced a scrappage scheme for old weighbridges to help industry invest in new infrastructure.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The waterproof Draeger X-zone 5000 wireless monitoring units detect and communicate the presence of a range of toxic, combustible and explosive gases over longer distances.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Macro 2010 attendees will be able to hear Dr Samiul Amin present his study: 'Extreme rheometry of entangled and network-forming polymers: an optical microrheology and LAOS study'.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Rotork valve actuators have been used during an underground gas-storage-facility upgrade in Latvia.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Able has launched the J605 Jerome hydrogen sulphide (H2S) analyser, which is suitable for odour monitoring in the waste and water industries.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Exeter Analytical supplies high-quality copper for the determination of nitrogen/protein in food and agricultural materials using the Dumas method.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Cambridge Sensotec has launched purpose-made hard cases for its Rapidox series of gas analysers.

Read more...

Manufacturing & Logistics IT Magazine >> 
Mobile Computing Manufacturer to Integrate Push to Talk, Push to Locate and Push to Alert Software for Enhanced Real Time Communication in the Field.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Magnetrol International has been nominated in the Belgian economic magazine 'Trends' for a 'Gazelle' award, showing that it is a fast-growing company that symbolises competitive entrepreneurship.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Auma Actuators's modular actuation technology will be used to support an asset management system at the Rhine port steam power plant (RDK) in Karlsruhe, Germany.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Chamois Metrology and Nichesensor are introducing a range of low- and ultra-low-pressure transmitters for wind tunnels, cleanrooms, flow and level measurement and filter and furnace monitoring.

Read more...

Manufacturing & Logistics IT Magazine >> 
handheld and “Monaco 7100” truck mounted terminals by leading real-time mobile computing solution providers Belgravium Ltd.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Siemens Industry Automation has launched the Sitrans LVS100 to its line of vibrating point level switches for hazardous applications in the mining, food, chemical and pharmaceutical industries.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Baldor's e100 servomotor drives, suitable for use in standalone motion control systems or networked systems, are now compatible with the Ethernet/IP, Modbus TCP and Powerlink industrial standards.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Baumer's battery-powered Flexprogrammer 9701 device, suitable for mobile use, enables all pressure transmitters in the PB range to be configured on a PC.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Celesco's SR1 series of string pot sensors, available from Variohm Eurosensor, are now available with an incremental encoder measurement source for industrial position sensing applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Samson Controls offers a range of valves that are self-draining and incorporate cavity-free internals to help promote effective CIP and SIP for food processing and pharmaceutical applications.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
The Spectro Midex from Spectro Analytical Instruments is a sensitive XRF spectrometer designed for the identification of toxic elements in electronic devices and forensic analysis.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
ABB Automation Tech has released an application factfile covering temperature measurement in the cement industry, available in PDF format.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Witt has added a Bluetooth interface and a built-in barcode reader to its Oxybaby 6.0 hand-held gas analyser, which can help perform quality control checks in food packaging applications.

Read more...

Manufacturing & Logistics IT Magazine >> 
Every year, RFID adoption picks up the pace, moving into different verticals and finding new applications. The burning question is: will RFID replace the barcode, and if so when?

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Recent polymer co-extrusion studies have demonstrated the value of a die developed by Fleming Polymer Testing and Consultancy for use with the Rosand capillary rheometer from Malvern Instruments.

Read more...

Gas monitoring and analysis latest news on Processingtalk >> 
Fluke has reduced the recommended prices in Europe of its Ti25, TiR and TiR1 thermal imagers, designed for day-to-day troubleshooting and maintenance, until 30 September 2010.

Read more...


Download the EMS Magazine Click the image to launch the interactive magazine

Explore EMS

EDITORIAL

PRODUCTS & SERVICES DIRECTORY

RECRUITMENT

EVENTS

FORUM

EQUIPMENT FOR SALE

New Flir I5 Thermal imager, Quality Used Forklift Trucks at Bargain Prices, IR Equipment For Sale, Eurobond Adhesives, New Tritex Multigauges, New CCTV Tester ...

LINKS

CONTACT US


www.EngineeringMaintenance.info

Specifically designed to promote technical excellence in maintenance, informing and educating the top maintenance professionals across the globe. Maintenance is often seen as a cost to business instead of a major benefit. A properly structured maintenance programme not only reduces downtime but also increases productivity and efficiency levels, which in turn improve the profitability of a company.

Engineering maintenance Solutions is a unique new media information company unlike any other you may have used in the past. We provide the perfect platform in which to promote your company’s products and services.This site contains the latest editorial, news, jobs, workshops, video presentations, forums, directory, events & more.

 Copyright Engineering Maintenance Solutions 2009 ©