BEKO Technologies are pleased to announce a new and we believe unique service to users of high quality compressed air. For the last 2 years BEKO Technologies have been selling the METPOINT OCV to customers who are required to have a regular inline monitoring of the residual hydrocarbon vapour in their compressed air stream. A number of customers have asked us for the possibility to measure multiple points in their systems several times a year and this makes a stationary system uneconomical. The solution is the Mobile METPOINT.
The device has multiple measuring modes and will measure the following parameters plus the flow through the device which is useful if the whole compressed air stream is being
• Residual oil content (in the form of vapour) in mg/m3
• Pressure dewpoint in ̊ Ctd
• Temperature in ° C
• Relative humidity in %
• Operating pressure in bar (g)
The unit should only be installed on systems behind oil free compressors or systems which include well maintained carbon filtration because the unit is so sensitive and will measure down to 0.003 ppm of oil vapour in the line, well below ISO 85731 Class 1 for oil.
Company: BEKO Technologies Limited, 2 & 3 West Court, Buntsford Park Road, Bromsgrove, Worcestershire, England, B60 3DX.
Tel: 01527 575778. Fax: 01527 575779. Contact: Ruth Goodison
E¬mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Website: www.bekotechnologies.com
| < Prev | Next > |
|---|
nsp_170.jpg "The diffusion of vibration monitoring.")
nsp_170.jpg "The Hidden possibility - SPM Instrument")
