Compressed air drying is a decisive factor for the process reliability in the production and for the operational reliability in compressed-air systems. Therefore, BEKO has offered a comprehensive program regarding compressed-air drying for many years. Amongst others, the cold-regenerated Drypoint AC adsorption dryers for volume flows up to 1500 m3/h are highly regarded. However, for some compressed-air users, this is not enough. With the heat-regenerated BEKO Everdry adsorption dryers for volume flows up to 20,000 m3/h (and more), Beko offers standardised system solutions for compressed-air drying on a grand scale.
This makes it clear: as far as BEKO Everdry is concerned, it is not the available technology, which determines the concept of a drying plant, but the solution-orientated, optimum technology. Everair GmbH, a company of the Beko group, is responsible for the engineering and production. It has a sound experience with regards to compressed air plant construction. This experience, the industry knowledge and the international capacities of the Beko group complement one another to provide a unique service offering for drying systems.
Four basic versions of the heat-regenerated adsorption dryers are available, of which three are without purge air application (zero purge), and one with purge air consumption.
The BEKO Everdry FRA draws blower air for the cooling directly from the ambient air and thus consumes no purge air. With a pressure dew point of –40 degrees C, the FRA is the optimum solution for the standard application from 600 m3/h upwards.
BEKO Everdry FRC is the name of the price-orientated adsorption dryer with a performance range between 600 and 3400 m3/h at a pressure dew point of –40 degree C. As a zero purge dryer, it also cools using blown air from the ambient air.
In contrast, the FRP type cools air via a pressure-released partial stream of dry air consumption amounts to 2 % of the volume flow on average. Lower investment costs make the BEKO Everdry FRP a well-priced heat-regenerated adsoprion dryer for a performance range of 600 m3/h upwards.
As far as the BEKO Everdry FRL for a performance range from 900 to 20000 m3/h is concerned, cooling is effected via blower air in a closed loop (zero purge). Therefore, the FRL is particularly suitable for application in tropical climates. Furthermore, it offers highest process reliability with a pressure dew point of up to –70 degree C.
Taken together these dryer ranges represent a total solution package for large compressed air drying requirements, backed the world renown BEKO reliability.
Information for Editors: Beko Technologies Limited is based in Bromsgrove, Worcestershire. We supply the full package for compressed air and condensate treatment. Bekomat zero-loss drain traps, Owamat oil/water separators, Drypoint compressed air dryers, Clearpoint filters and Bekosplit emulsion splitters to treat problem condensate. Bekoblizz deep cold compressed air cooling system for use with blow moulding. BEKO offer an unrivalled expertise in the whole spectrum of managing compressed air and condensate.
Company: Beko Technologies Limited, Unit 2 West Court, Buntsford Park Road, Bromsgrove, Worcestershire, England, B60 3DX.
Tel: 01527 575778. Fax: 01527 575779. Contact: Ruth Goodison
E-mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Website: www.bekotechnologies.com
| < Prev | Next > |
|---|
nsp_170.jpg "The diffusion of vibration monitoring.")
nsp_170.jpg "The Hidden possibility - SPM Instrument")
